Know your width. Before you build.
74Weld portal axles lift your vehicle 3.88″ at the hub without touching the suspension, so factory geometry stays put. They also add width, and width is one of the most common questions we get. To better explain the nuances of this, we built this calculator. While we can tell you we add 2.7–3.75″ per side depending on the platform, that’s only part of the story. What matters most is your overall width, from the outside of one tire to the outside of the other, and that comes down to the whole package: the portal, the wheel, and the tire.
Our goal has always been education, so we built this calculator to give you as much information as we can. Use it to see how wide your build will be, then fine-tune it with your wheel and tire selection to find the right setup for you. If you have any questions, reach out. We’re always happy to talk it through.
— Quinn, Founder & CEO, 74Weld
Read: Portal Width Doesn’t Matter. Your Overall Vehicle Width Does.Vehicle
Tires
Wheels
Positive offset pulls the tire in. Negative offset pushes it out.
- Portal width added
- Wheels
- Tires
- Front / rear
- Basis
Measured outside tire to outside tire; the wider axle is shown, rounded to the nearest ½ in. Actual width varies with lift height, suspension geometry, factory tolerances, tire model, inflation, and actual section width. Wheel fitment does not confirm tire clearance through steering and suspension travel.
How we calculate it
Outside tire width = stock wheel-mounting-surface (WMS) width + portal width added − twice the wheel offset + tire section width. Stock WMS is derived from factory track width plus twice the factory wheel offset, using one representative baseline per platform with front and rear kept separate. Derived WMS is an estimate, not a measured factory axle spec, and no measured-build corrections are applied. The 74Weld x Currie package uses its published complete width, which already includes portals.
| Platform | Basis | Stock track F / R | Factory offset | WMS F / R | Sources |
|---|
Ask about this setup
Send us your setup and we’ll get back to you. No need to retype anything below.
Thanks, we got it.
Our team will review your setup and reach out soon. Questions in the meantime? Call 619.286.6656.
