Full-Size Legacy Toyota Portal Axle

$17,000.00
Shipping calculated at checkout.
Model
Total$17,000.00

Pickup available at Local Pickup

Usually ready in 5+ days

The Full-Size Legacy portal brings our race-proven technology to the 200 Series platform. This portal design borrows from our race-winning Ultra4 and Trophy Truck portals and scales down to package on the Land Cruiser 200, second generation Tundra, and Lexus LX570. With these portals you are able to re-gear, lift, improve ground clearance, and provide room for larger tires, all with a single product.

Portal reduction takes strain off the transmission, axles, and driveshafts, so you gain capability without loading up the rest of the drivetrain. You gain 3.88 inches of ground clearance at each hub, which puts the clearance where it matters, under the diffs rather than under the body.

The portal is your lift, the portal is your re-gear, and unlike conventional kits, it gives you ground clearance. A portal lift is widely recognized as the best solution for an independent suspension system. It is why so many Ultra4 and Trophy Truck racers run our Race Portals. The portal allows you to keep your arms, steering, and CVs flat at ride height yet still gain large improvements in ground clearance. Stop lifting your suspension and start lifting your axles.

Vehicle Compatibility

  • 2008-2021 Land Cruiser 200 Series
  • 2007-2021 Toyota Tundra
  • 2008-2021 Lexus LX570
What's Included
  • Billet Aluminum Portals Front and Rear
  • Upgraded front rotors
  • Rear calipers and rotors with integrated parking brake
  • 4340 Heat Treated Rear Full Float Axle Shafts
  • All Necessary Hardware and Detailed Instructions
  • Maxima Full Synthetic Oil
Specifications
  • 6×5.5″ lug pattern
  • 1.22 gear reduction
  • 3.88″ lift
  • 2.7″ width increase per side
  • Factory ABS compatible
  • AHC Compatible
  • KDSS Compatible
  • Billet 7075 Knuckle with steel inserts.
  • Billet 6061 Portal Box
  • Converts your rear semi float axle to a full float
  • 4340 heat treated rear full float shafts included
  • Optimized width and scrub while maintaining stock suspension components
  • 17″ minimum wheel diameter required with a recommended backspacing of 5″-6″ for optimal scrub
  • We highly recommend our 17×8 +45 – 74W207 Forged Bead Grip wheel for
    this application if you plan on running 37’s. This wheel allows the
    tire to tuck into the rear fender when flexed and will not require lots
    of body cutting when running a 37″ tire.
Instructions and Guides